PPE & RFID: Scanning Revolution

Here at Syndustry Equipment we've been working with different scanning techniques for years. Often used are barcodes (1D) or QR-codes (2D), but electronic chip-based scanning has quickly been gaining ground.
The two most notable scanning techniques are RFID (Radio Frequenty IDentification) and NFC (Near Field Communication).

In this article we'll discuss the advantages and disadvantages of each technique, and what it means for an organisation looking to implement a scanning technique for their PPE.

PPE symbol - hard hat

The main forms of item identification

RFID Radio Frequency IDentification
NFC Near Field Communication
Barcode 1-dimensional optical code
QR-code 2-dimensional optical code

Examples of PPE are:

  • hard hats
  • ear protection
  • high visibility clothing
  • safety footwear and safety harnesses
  • thermal, weather and waterproof clothing
  • respiratory protective equipment (RPE)

A lot of industries work with PPE. Any profession that includes potentially hazardous work often incorporates (compulsory) PPE. For example, a construction worker must wear a helmet, shoes and gloves. Other industries where the use of PPE is prevalent are, for example; stage building, rope access, oil & gas and emergency services.

Example of PPE being used

PPE symbols

There are many PPE symbols in use on signage around work areas to indicate required PPE. We’ve all probably seen the sign requiring you to wear safety boots or a hard hat.

It’s important for both employer and employees that the indicated use of PPE is clear and accurate. An employer is responsible for adhering to PPE regulations and for the direct safety of his or her employees as we will discuss later.

To clearly signal to use of PPE the symbols below are used, for example:

  • If the work area is very loud, the employees need to wear ear protection.
  • When clean hands and good hygiene are of the utmost importance, then use cleaning & washroom signs.
PPE symbols 1PPE symbols 2PPE symbols 3

Often used examples of PPE symbols.

What is PPE in health and safety

Both employer and employees have a responsibility to adhere to all laws and regulations concerning the registration, use and maintenance of equipment. PPE in health and safety refers to these responsibilities as well as the actual pieces of equipment.

So, PPE in health and safety covers a lot of ground, and it’s not just a matter of putting the helmet on your head. That’s is simply the end result of a proper PPE policy. Once an employer acquires or introduces new PPE requirements a number of key issues are to be addressed:

  • maintain a a complete history of each item
  • perform and register periodic inspections of PPE
  • make sure employees have the right PPE for the job
  • make sure employees have accurate information on how to use each item
  • ensure that PPE on site is certified and ready for use

Often, one or more of the above issues are neglected or underappreciated. This is largely accidental and is the result of the lack of workflows or administrative tools that help properly address these issues. Failing to address these issues can at best result in higher operating costs and at worst an increased risk to employees’ health and safety.

//hybrid solution

Wrapping up

Implementing an identification technique can hugely improve handling and proper registration of items. Though the cost of chip-based solutions such as RFID and NFC is falling, the most cost-effective way of identifying equipment can be found in hybrid solutions. However, more and more manufacturers are adding RFID/NFC-chips to their PPE, further reducing the costs incurred by having to manually apply a chip yourself.

Scanning techniques can help reduce handling time drastically, coupled with a PPE management platform such as Syndustry Equipment To help organizations meet regulatory demands and to help protect employee’s safety, we’ve developed Syndustry Equipment. Our platform allows you to quickly register, inspect and mobilise equipment as well as offer employees a knowledge base on how to correctly use their PPE.

Do you need help with your PPE to be compliant or reduce handling costs? Check out the benefits of our free platform for operational companies, or if you manage equipment for clients for distributors of PPE.

Please note: PPE regulations differ per country, make sure you comply with your local laws and regulations when handling PPE. For more information on the applicable laws in the EU, check out regulation 2016/425:
EU legislation and PPE

Syndustry Equipment PPE platform

Sign up

Sign up and upgrade your PPE inventory in minutes!
Feel free to contact us if you have any questions.

Your application (1/2)

Manager: if you handle your own equipmentDistributor: if you handle equipment for othersCombi: if you handle equipment for yourself and others

Your details (2/2)

Check your email

We've sent you an email with an activation link.
Once confirmed we'll build your new application and you can get started!

Please check your spambox if you don't receive the activation link.

Our clients.

RidgeGear Ltd

Dutch Ministry of Defence

SGS Upstream

Ascent Safety

Syndustry has saved about 80% of our time inspecting our equipment. Syndustry offers the complete solution.

Tom Hancock
RidgeGear Ltd

With Syndustry we have complete control over our equipment and we can be certain of its safety record.

Mick Bakker
Vandesky - Rope Access

Syndustry saves me 30% on managing equipment and inspections and was praised during our GWO audit.

Robert Peters
PPE Store & Training centre - industrieelklimmen.nl